The summers seem to be getting hotter each year, and the winters most definitely seem to be getting colder. With how unpredictable the weather can be and is in Melbourne, in particular the Mornington Peninsula, having appropriate and reliable heating and cooling systems installed correctly by professionals in your home is exceptionally important.
For over 20 years, CoreTemp Australia has been providing exceptional services to residents of the Mornington Peninsula and surrounds. We know it is imperative to have efficient and energy-saving heating and cooling systems.
The following are some practical energy-saving tips for your heating system that you can implement in your home.
1. Zoned Heating and Cooling
At CoreTemp Australia, we offer a heating and cooling solution called My Air. This is an intelligent way of being able to design an HVAC system, and it divides either your home or office into multiple zones using a single system instead of one unit per system. There are a number of benefits to using a system such as this, including energy-saving heating. Its biggest benefit is that if you’re not using a particular area of your home, you do not need to have the unit in that area on. This, therefore, means that you do not need to pay for additional heating for areas of your home that are not being used. Be sure to close off the areas you are not heating at the time to ensure maximum energy-saving benefits. To learn more about it, you can read Zoned Heating and Cooling: The Smart Way to Save Energy.
2. Choosing the right option for your heating needs
We offer a range of services for your heating needs, including ducted, split systems, Variable Refrigerant Volume (VRV), gas ducted heating, and hydronic heating. Depending on your home, location, particular heating requirements, and what will be most efficient for your home. You can contact us to discuss all the options that would be available to you and book your complimentary advisory session.
3. Insulation
Having appropriate levels of insulation in your home will allow you to keep the heat coming from your system inside. There are a number of different types of insulation materials, including polyester, natural wool, and extruded or expanding polystyrene.
For all newly built homes, there are specific requirements in relation to insulation as per the Victorian Building Authority. For pre-existing homes, while it is not required to be upgraded or replaced, it may be quite important to do so. You can also read information on the Nationwide House Energy Rating Scheme (NatHERS) about energy efficiency requirements.
4. Regular maintenance of your heating system
It is important to have your system regularly maintained. It is a good idea to have it serviced annually by a professional to ensure you have all parts of your system checked over. This includes:
- Checking ducts (for ducted systems)
- Overall system checks
- Cleaning of coils
- Cleaning of filters
It is also important to ensure your filters are checked and changed on a regular basis. It is recommended to change them approximately every three months. If your area has additional wind around, the filters may need to be replaced more regularly.
5. Heating system upgrade
Sometimes, the best energy-saving heating tip is to upgrade your system. As mentioned above, our team at CoreTemp Australia offers zoned heating and cooling options. This is a good option for energy-saving heating. No matter which system you choose, it is more than likely a more energy-saving option than using an old or outdated system.
6. Thermostat settings
Whilst we all want to be warm and comfortable, especially on a cold winter’s night, in order to save energy, it can be really important to lower the temperature even by just a couple of degrees, and maybe look into a cozy blanket or really comfortable hoodie. A great option to keep yourself extra warm is looking into an Oodie, founded by Davie Fogarty, an entrepreneur from South Australia.
It is recommended by the government energy website, to set your thermostat to between 18°C and 20°C. There are also a number of other energy-saving tips for you to look into.
You can also look into a smart or programmable thermostat so that you can ensure that the temperature is lowered while you are away from home. It also means that you can check to see whether your system(s) are all switched off if you are leaving for more than a day.
7. Ceiling fans
Did you know that ceiling fans do actually spin both ways? During the summer, your ceiling fan needs to spin counterclockwise to suck the heat up towards the ceiling.
However, during the winter months, you can usually flick a switch on the ceiling fan to spin clockwise. This will push the warm air downward, ensuring your home stays as warm as possible.
8. Window coverings
It can be beneficial for you to also invest in some window coverings, such as blackout curtains or blinds. These will help you to keep the heat in your home. During the winter months, it is very easy for heat to be sucked out through your windows.
You can also look into getting double-glazed windows to help improve your home’s insulation and have efficient energy-saving heating.
CoreTemp Australia is available to support you in the process of choosing the best heating and cooling system for your home. We have more than 20 years of experience in the industry and are a great team led by the founder, Corey Webb.
We are dedicated to exceptional customer service and believe in exceeding our customers’ expectations. Contact us today to book your complimentary advisory session today.